EZ Balancer LITE

Finally! You can balance the C.G. of all your Model Aircraft by yourself. No more trying to balance them on your fingertips. No more excessive flexing of the wings trying to lift your Model at the wing tips. Built-in stops on the cradles limit the travel so you can balance your model "Hands Free" without fear of it tipping over or sliding off the balancer. No more "Guessing" where to put your battery packs or weights. You can move them back and forth until you achieve perfect balance.

For models up to 18lbs

EZ Balancer II

The EZ Balancer II  is designed for models from 18lbs up to 75lbs. The  "Super Size" kit is an extension to the uprights of the EZ Balancer II  for those Extra Tall Landing Gear. Our customers asked for them, and we listened.

It will accommodate up to 18" wide fuselages. Much wider fuselages can also be accommodated.

Squadron Green Putty 65g (2.3oz)

As attested to by Dave Platt in his DVD's this is one of the best hobby filler for planes, cars, ships, or any plastic or metal model.

Excellent fast drying putty for filling those gaps or sculpting modifications. Files or sands to shape after about 30 minutes drying. .

Gorilla Polyurethane glue:

Use in many situations imstead of epoxy .  For example, when wanting a bond that needs more strength than an aliphatic resin, but epoxy seems to be too much.

The main thing I use polyurethane glue for is to laminate parts.  It does not cause severe warpage (if weighted)

• Use for

  • Laminating.

  • Bonds needing more strength than traditional glues, but not as much strength as epoxy.

• Do not use for

  • General construction

.

Gorilla Glue - Fast Cure

Now you can have the strength and versatility of Gorilla Glue in a fast-cure formula that requires only 30-60 minutes in the clamps! This formula also dries white for a completely invisible glue line. Bonds virtually anything, including wood, stone, metal, ceramics and plastics. Great for small projects and repairs. No mixing required. 100% waterproof. 2 fl. oz.

Flite Metal:

12" x 5' (40cm x 152.4cm)

Is 0015 inch thick self-adhesive aluminum for replicating a full size aircraft finish. or for hatches and canopies

the self adhesive aluminium covering system designed to give your scale model the authentic natural aluminium appearance of a full size aircraft. Is applied to the surface of sheeted and fibre glassed fuselages, wings, gear struts, weapon systems, and anything made of aluminum or titanium on a full size aircraft .

Titebond 8oz:

Light and strong.  Carpenter's glue is the primary adhesive used by many model builders to build flying model aircraft.  It's longer working time ensures everything is as it should be before the glue sets up.

Because it is water-based, it allows for neat glue joints because excess glue removes easily with a damp sponge or paper towel while the glue is still wet.

Titebond sands easily.

Araldite Precision - Tube Pack Araldite ' Precision' is an extra strong long lasting adhesive, ideal for large areas and assembling a number of components. Solvent free, heat and cold, water and oil resistant. Bonds metals, wood, masonry, ceramics, glass and most hard plastics.

Can be sanded and painted. Each blister contains one tube of adhesive and one tube of hardener. Mix equal proportions of each tube thoroughly and it is ready to apply. Two tube pack. NOTE Slow setting , items are repositionable for 2 hours. Size Tube Pack.15ml (Each Tube)

Great for attaching Firewalls etc

MINWAX POLYCRYLIC: 960ml

Waterbase varnish, excellent for covering nylon, tissue or fibre glass cloth. It is waterbased as such no smell, mixing or sticky mess.

£16.00